Technical Specifications and Application of 225mm 1100W Halogen Heat Lamps

September 11, 2026

Let’s talk about the 225mm 1100W Halogen Lamp

If you’re looking for heat—and you need it now—this is the tool for the job. We built this lamp for those moments where you can’t afford to wait around for things to warm up. It’s all about hitting a high energy density fast. At 230V and 1100W, this tube basically turns electricity into an intense burst of shortwave infrared radiation. The power side of things Packing 1100W into a short 225mm frame creates a serious heat footprint. We stuck with the 230V spec so it plays nice with most industrial grids. That means you can just wire it in and go, without messing around with bulky transformers. The best part? The filament hits its operating temperature almost instantly. If you’re running an automated line, that’s a huge win because you aren’t wasting time on long warm-up cycles. Why the quartz and halogen matter We use a high-purity quartz envelope for the casing, but the real magic is the halogen gas inside. Here’s how it works: as the tungsten filament evaporates, the halogen gas pushes it right back onto the wire. It stops the filament from thinning out and snapping. Because of that, the lamp lasts way longer and keeps its brightness steady, unlike those old-school incandescent tubes that dim as they age. Putting it to work (and a few warnings) You’ll usually see these dropped into PET blowing machines or industrial drying tunnels. Because it’s shortwave IR, the heat doesn’t just sit on the surface—it sinks in deep and fast. But, a word of advice. Keep an eye on your reflectors. If they get pitted or knocked out of alignment, you’re throwing away a ton of heat. That forces the lamp to work harder and run hotter just to keep up. Also, remember that 1100W in such a small space getshot. Really hot. Double-check that your housing and your cable insulation can handle the heat, or you’ll end up with melted wiring on your hands.